FORM 10-K

                        SECURITIES AND EXCHANGE COMMISSION
                              Washington, D.C.  20549

          [X]    ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
                 SECURITIES EXCHANGE ACT OF 1934 (FEE REQUIRED)

                     FOR THE FISCAL YEAR ENDED JUNE 30, 1995

           [ ]   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
                 SECURITIES EXCHANGE ACT OF 1934 (NO FEE REQUIRED)
                    For the transition period from         to         

                           Commission File Number 1-5318

                                 KENNAMETAL INC.
               (Exact name of registrant as specified in its charter)

              Pennsylvania                               25-0900168
     (State or other jurisdiction of                  (I.R.S. Employer
     incorporation or organization)                  Identification No.)

                    Route 981 at Westmoreland County Airport
                                  P. O. Box 231
                        Latrobe, Pennsylvania  15650
                    (Address of principal executive offices)

     Registrant's telephone number, including area code: (412) 539-5000

          Securities registered pursuant to Section 12(b) of the Act:

                                                  Name of each exchange
             Title of each class                   on which registered
             -------------------                 -----------------------

   Capital Stock, par value $1.25 per share      New York Stock Exchange
   Preferred Stock Purchase Rights               New York Stock Exchange

     Securities registered pursuant to Section 12(g) of the Act: None.

Indicate by check mark whether the registrant (1) has filed all reports 
required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 
1934 during the preceding 12 months, and (2) has been subject to such filing 
requirements for the past 90 days.  YES [X]  NO [ ]

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 
of Regulation S-K is not contained herein, and will not be contained, to the 
best of registrant's knowledge, in definitive proxy or information statements 
incorporated by reference in Part III of this Form 10-K or any amendment to 
this Form 10-K.  [X]

As of August 31, 1995, the aggregate market value of the registrant's Capital 
Stock held by non-affiliates of the registrant, estimated solely for the 
purposes of this Form 10-K, was approximately $891,200,000.  For purposes of 
the foregoing calculation only, all directors and executive officers of the 
registrant and each person who may be deemed to own beneficially more than 5% 
of the registrant's Capital Stock, have been deemed affiliates.

As of August 31, 1995, there were 26,606,068 shares of Capital Stock 
outstanding.

                     DOCUMENTS INCORPORATED BY REFERENCE

Portions of the 1995 Annual Report to Shareholders are incorporated by 
reference into Parts I, II, and IV.

Portions of the Proxy Statement for the 1995 Annual Meeting of Shareholders 
are incorporated by reference into Parts III and IV.


                               TABLE OF CONTENTS

Item No.
--------
                                    PART I
    1.     Business
    2.     Properties
    3.     Legal Proceedings
    4.     Submission of Matters to a Vote of Security Holders
           Officers of the Registrant

                                    PART II

    5.     Market for the Registrant's Capital Stock and Related Stockholder
           Matters
    6.     Selected Financial Data
    7.     Management's Discussion and Analysis of Financial Condition and
           Results of Operations
    8.     Financial Statements and Supplementary Data
    9.     Changes in and Disagreements on Accounting and Financial Disclosure

                                    PART III

   10.     Directors and Executive Officers of the Registrant
   11.     Executive Compensation
   12.     Security Ownership of Certain Beneficial Owners and Management
   13.     Certain Relationships and Related Transactions

                                    PART IV

   14.     Exhibits, Financial Statement Schedules and Reports on Form 8-K


                                    PART I

ITEM 1.  BUSINESS

Overview
--------

Kennametal Inc. was incorporated in Pennsylvania in 1943.  Kennametal Inc. and 
subsidiaries ("Kennametal" or the "company") manufacture, purchase and 
distribute a broad range of tools, tooling systems, supplies and services for 
the metalworking, mining and highway construction industries.  Kennametal 
specializes in developing and manufacturing metalcutting tools and wear 
resistant parts using a specialized type of powder metallurgy.  Kennametal's 
metalcutting tools are made of cemented carbides, ceramics, cermets and other 
hard materials.  The company manufactures a complete line of toolholders and 
toolholding systems by machining and fabricating steel bars and other metal 
alloys.  Kennametal's mining and construction cutting tools are tipped with 
cemented carbide and are used for underground coal mining and highway 
construction, repair and maintenance.  Metallurgical products consist of 
powders made from ore concentrates, compounds and secondary materials.

Business Segment and Product Classes
------------------------------------

The company operates predominantly as a tooling supplier specializing in 
powder metallurgy, which represents a single business segment.  While many of 
the company's products are similar in composition, sales are classified into 
three major categories:  metalworking products, mining and construction 
products and metallurgical products.  The company's sales by product class are 
presented on page 23 of the 1995 Annual Report to Shareholders, and such 
information is incorporated herein by reference.  Additional information about 
the company's operations by geographic area is presented on page 31 of the 
1995 Annual Report to Shareholders, and such information is incorporated 
herein by reference.

Metalworking Products
---------------------

Kennametal markets, manufactures and distributes a full line of products and 
services for the metalworking industry.  The company provides metalcutting 
tools, abrasives, precision measuring devices, power tools, hand tools and 
machine tool accessories to manufacturing companies in a wide range of 
industries.

A Kennametal tooling system usually consists of a steel toolholder and an 
indexable cutting tool called an insert.  During a metalworking operation, the 
toolholder is positioned in a machine tool which provides the turning power.  
While the workpiece or toolholder is rapidly rotating, the cutting tool insert 
contacts the workpiece and cuts or shapes the workpiece.  The cutting tool 
insert is consumed during use and must be replaced periodically.  Metalcutting 
operations include turning, boring, threading, grooving, milling and drilling.  
The company also makes wear resistant parts for use in abrasive environments 
and specialty applications.

Mining and Construction Products
--------------------------------

Mining and construction cutting tools are fabricated from steel parts and 
tipped with cemented carbide.  Mining tools, used primarily in the coal 
industry, include longwall shearer and continuous miner drums, blocks, bits, 
pinning rods, augers and a wide range of mining tool accessories.  The company 
also supplies compacts for mining, quarrying, water well drilling and oil and 
gas exploration.

Construction cutting tools include carbide-tipped bits for ditching, trenching 
and road planing; grader blades for site preparation and routine roadbed 
control and snowplow blades and shoes for winter road plowing.

Metallurgical Products
----------------------

The company makes proprietary metallurgical powders for use as a basic 
material in many of its metalworking, mining and construction products.  In 
addition, the company produces a variety of metallurgical powders and related 
materials for specialized markets.  These products include intermediate 
carbide powders, hardfacing materials and matrix powders which are sold to 
manufacturers of cemented carbide products, oil and gas drilling equipment and 
diamond drill bits.

Recent Acquisition
-------------------

In August 1993, the company acquired an 81 percent interest in Hertel AG 
("Hertel") for $43 million in cash and $55 million of assumed debt.  Hertel, 
based in Fuerth, Germany, is a manufacturer and marketer of cemented carbide 
tools and tooling systems which are similar to the metalcutting tools and 
tooling systems produced by the company.  The acquisition of Hertel has not 
materially changed the product lines offered by the company.  While the 
company's primary market is the United States, Hertel's primary market is 
Germany and western Europe.  The acquisition of Hertel significantly increased 
the company's market share in these markets.  Hertel had consolidated sales of 
approximately $201 million for the year ended December 31, 1992.

Since January 1, 1994, the company purchased additional shares of Hertel for 
$12 million, thereby increasing the company's ownership interest to 91 percent 
at June 30, 1995.

International Operations
------------------------

The company's principal international operations are conducted in western 
Europe and Canada.  In addition, the company has joint ventures in Japan, 
India and Italy, sales offices and sales agents in Asia-Pacific and sales 
agents and distributors in eastern Europe and other areas of the world.  The 
company's international operations are subject to the usual risks of doing 
business in those countries, including currency fluctuations and changes in 
social, political and economic environments.  In management's opinion, the 
company's business is not materially dependent upon any one international 
location involving significant risk.

The company's international sales are presented on page 23 of the 1995 Annual 
Report to Shareholders, and such information is incorporated herein by 
reference.  Information pertaining to the effects of foreign currency 
fluctuations is contained under the caption "Foreign Currency Translation" in 
the notes to the consolidated financial statements on page 24 of the 1995 
Annual Report to Shareholders, and such information is incorporated herein by 
reference.

Marketing and Distribution
--------------------------

The company's products are sold through three distinct channels:  direct 
sales, full-service supply and mail order catalogs.  The company's 
manufactured products are sold to end-users primarily through a direct sales 
force.  Service engineers and technicians directly assist customers with 
product design, selection and application.  In addition, Kennametal-
manufactured products, together with a broad range of purchased products, are 
sold through full-service supply programs and mail order catalogs.  The 
company also uses independent distributors and sales agents in the United 
States and certain international markets.

The company's products are marketed under various trademarks and tradenames, 
such as Kennametal*, Hertel*, the letter K combined with other identifying 
letters and/or numbers, Block Style K*, Kendex*, Kenloc*, Top Notch*, 
Erickson*, Kyon*, KM*, Drill-Fix* and Fix-Perfect*.  Purchased products are 
sold under the manufacturer's name or a private label.

Competition
-----------

Kennametal is one of the world's leading producers of cemented carbide tools 
and maintains a strong competitive position, especially in the United States 
and Canada.  There is active competition in the sale of all products made by 
the company, with approximately 30 companies engaged in the cemented carbide 
business in the United States and many more outside the U.S.  Several 
competitors are divisions of larger corporations.  In addition, several 
hundred fabricators and toolmakers in the United States, many of whom operate 
out of relatively small shops, produce tools similar to those made by the 
company and buy the cemented carbide components for such tools from cemented 
carbide producers, including the company.  Major domestic competition exists 
from both U.S.-based and international-based concerns.  In addition, the 
company competes with thousands of industrial supply companies in the United 
States.

The principal methods of competition in the company's business are service, 
product innovation, quality, availability and price.  The company believes 
that its competitive strength rests on its customer service capabilities 
including its multiple distribution channels, its ability to develop new and 
improved tools responsive to the needs of its customers and the consistent 
high quality of its products.  These factors frequently permit the company to 
sell such products based on the value added for the customer rather than 
strictly on competitive prices.

Seasonality
-----------

Seasonal variations do not have a major effect on the company's business.  
However, to varying degrees, traditional summer vacation shutdowns of 
metalworking customers' plants and holiday shutdowns often affect the 
company's sales levels during the first and second quarters of its fiscal 
year.

Backlog
-------

The company's backlog of orders is generally not significant to its 
operations.  Approximately 80 percent of all orders are filled from stock and 
the balance is generally filled within short lead-times.

Research and Development
------------------------

The company is involved in research and development of new products and 
processes.  Research and development expenses totaled $18.7 million, $15.2 
million and $14.7 million in 1995, 1994 and 1993, respectively.  Additionally, 
certain costs associated with improving manufacturing processes are included 
in cost of goods sold.  The company holds a number of patents and licenses 
which, in the aggregate, are not material to the operation of the business.

The company has brought a number of new or improved products to market during 
the past few years.  These include metalcutting inserts that incorporate 
innovative tool geometries for improved chip control and productivity, grade 
KC994M* multi-coated metalcutting inserts for milling applications, grades 
KC9010* and KC9025* multi-coated metalcutting inserts for turning 
applications, grade Kyon 3500* ceramic metalcutting inserts and grade KCD25* 
diamond-coated metalcutting inserts.

Raw Materials and Supplies
--------------------------

Major metallurgical raw materials consist of ore concentrates, compounds and 
secondary materials containing tungsten, tantalum, titanium, niobium and 
cobalt.  Although these raw materials are in relatively adequate supply, major 
sources are located abroad and prices at times have been volatile.  For these 
reasons, the company exercises great care in the selection, purchase and 
inventory availability of these materials.  The company also purchases 
substantial quantities of steel bars and forgings for making toolholders and 
other tool parts and accessories.  Products purchased for resale are obtained 
from hundreds of suppliers located in the U.S. and abroad.

Employees
---------

The company employed approximately 7,000 persons at June 30, 1995, of which 
4,400 were located in the United States and 2,600 in other parts of the world, 
principally Europe and Canada.  Approximately 1,200 employees were represented 
by labor unions, of which 140 were hourly-rated employees located at plants in 
the Latrobe, Pennsylvania area.  The remaining 1,060 employees represented by 
labor unions were employed at eight plants located outside of the United 
States.  The company considers its labor relations to be generally good.

Regulation
----------

Compliance with government laws and regulations pertaining to the discharge of 
materials or pollutants into the environment or otherwise relating to the 
protection of the environment, did not have a material effect on the company's 
capital expenditures, earnings or competitive position for the year covered by 
this report, nor is such compliance expected to have a material effect in the 
future.


-------------------------------------
*  Trademark owned by Kennametal Inc.



ITEM 2.  PROPERTIES

Presented below is a summary of principal manufacturing facilities used by the 
company and its majority-owned subsidiaries.

Owned/ Location Leased Principal Products -------- ------ ------------------ UNITED STATES: Troy, Michigan Leased Metalworking Toolholders Fallon, Nevada Owned Metallurgical Powders Henderson, North Carolina Owned Metallurgical Powders Roanoke Rapids, North Carolina Owned Metalworking Inserts Orwell, Ohio Owned Metalworking Inserts Solon, Ohio Owned Metalworking Toolholders Bedford, Pennsylvania Owned Mining and Construction Tools and Wear Parts Latrobe, Pennsylvania Owned Metallurgical Powders and Wear Parts Johnson City, Tennessee Owned Metalworking Inserts New Market, Virginia Owned Metalworking Toolholders INTERNATIONAL: Port Coquitlam, Canada Owned Metallurgical Powders Victoria, Canada Owned Wear Parts Shanxi, China Owned Mining Tools Kingswinford, England Leased Metalworking Toolholders Ebermannstadt, Germany Owned Metalworking Inserts Mistelgau, Germany Owned Metallurgical Powders, Metalworking Inserts and Wear Parts Nabburg, Germany Owned Metalworking Toolholders Vohenstrauss, Germany Leased Metalworking Carbide Drills Arnhem, Netherlands Owned Wear Products
The company also has a network of warehouses and customer service centers located throughout North America, western Europe, Asia and Australia, a significant portion of which are leased. The majority of the company's research and development efforts are conducted in a corporate technology center located adjacent to corporate headquarters in Latrobe, Pennsylvania. All significant properties are used in the company's dominant business of powder metallurgy, tools, tooling systems and supplies. The company's production capacity is adequate for its present needs. The company believes that its properties have been adequately maintained, are generally in good condition and are suitable for the company's business as presently conducted. ITEM 3. LEGAL PROCEEDINGS (a) On August 13, 1993, the company was served with a Notice of Violation dated August 9, 1993, issued by the United States Environmental Protection Agency ("EPA"). The EPA alleges violations concerning visible emissions from the company's Fallon, Nevada facility. On October 6, 1993, the EPA issued an interim compliance order with respect to this matter. On April 26, 1994, the company was served with a second Notice of Violation dated April 19, 1994, which relates to the first Notice of Violation. The EPA alleges in the second but related notice the violation of a regulation concerning the allowable particulate emission rate. The company has agreed with EPA to pay a civil fine of $425,000 to settle those alleged violations without an admission of liability. (b) In connection with a Domination Contract with Hertel, under German law, the company is required to offer to minority shareholders to purchase their shares for a reasonable compensation and to guarantee dividends during the term of the Domination Contract (ending June 30, 1996, subject to annual renewals) and to pay to Hertel any net cumulative losses it sustains during the term and has liability to Hertel creditors as if Hertel merged with the company. Minority shareholders are contesting the reasonableness of the purchase price for minority shares and the minimum dividend on minority shares offered by the company in connection with the Domination Contract. It is management's opinion that Hertel has viable defenses to the contest of the reasonableness of the minority share purchase price and minimum dividend and, in any event, that the ultimate outcome of this matter will not have a material adverse effect on the results of operations or financial position of the company. (c) There are no other material pending legal proceedings, other than litigation incidental to the ordinary course of business, to which the company or any of its subsidiaries is a party or of which any of their property is the subject. ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS During the fourth quarter of fiscal year 1995, there were no matters submitted to a vote of security holders through the solicitation of proxies or otherwise.
OFFICERS OF THE REGISTRANT Name, Age, and Position Experience During Past Five Years (2) ----------------------- ------------------------------------- Robert L. McGeehan, 58 (1) President and Director since 1989. Chief President Executive Officer since October 1, 1991. Chief Executive Officer Director David B. Arnold, 56 (1) Vice President since 1979. Chief Technical Vice President Officer since 1988. Chief Technical Officer James R. Breisinger, 45 Vice President since 1990. Renamed Vice President Controller in 1994. Managing Director of Controller Europe from 1991 to 1994. Controller from 1983 to 1991. David T. Cofer, 50 (1) Vice President since 1986. Secretary and Vice President General Counsel since 1982. Secretary and General Counsel Richard P. Gibson, 60 Assistant Treasurer since 1985. Director Assistant Treasurer of Taxes since 1980. Director of Taxes James W. Heaton, 63 Senior Vice President and Director of Senior Vice President Customer Satisfaction since 1990. Director of Customer Satisfaction Richard C. Hendricks, 56 (1) Vice President since 1982. Director of Vice President Corporate Business Development since 1992. Director of Corporate Business General Manager of the Mining and Development Metallurgical Division from 1990 to 1992. Timothy D. Hudson, 49 Vice President since 1994. Director Vice President of Human Resources since 1992. Corporate Director of Human Resources Manager of Human Resources from 1978 to 1992. H. Patrick Mahanes, Jr., 52 (1) Vice President since 1987. Named Chief Vice President Operating Officer in 1995. Director of Chief Operating Officer Operations from 1991 to 1995. Director of Metalworking Manufacturing from 1988 to 1991. Richard V. Minns, 57 Vice President since 1990. Director of Vice President Sales for the Metalworking Systems Division Director of Metalworking Sales, since 1985. North America James E. Morrison, 44 Vice President since 1994. Treasurer Vice President since 1987. Treasurer Kevin G. Nowe, 43 Joined the company as Assistant General Assistant Secretary Counsel in 1992 and was elected Assistant Assistant General Counsel Secretary in 1993. Previously was Senior Counsel and Corporate Secretary of Emro Marketing Company in Enon, Ohio. Richard J. Orwig, 54 (1) Vice President since 1987. Named Chief Vice President Financial and Administrative Officer in Chief Financial and Administrative 1994. Director of Administration from Officer 1991 to 1994. Director of Human Resources from 1989 to 1991. Alan G. Ringler, 45 (1) Vice President since 1989. Director of Vice President Metalworking Systems Division since 1992. Director of Metalworking Systems Director of Metalworking, North America, Division from 1991 to 1992. Managing Director, Europe, from 1990 to 1991. Michael W. Ruprich, 39 (1) Vice President and President of J&L Vice President, Kennametal Inc. America Inc. since 1994. General Manager President, J&L America Inc. of J&L from 1993 to 1994. National Sales and Marketing Manager from 1992 to 1993. General Manager-East Coast Region from 1990 to 1992. P. Mark Schiller, 47 Vice President since 1992. Director of Vice President Kennametal Distribution Services since Director of Kennametal Distribution 1990. Services Notes: ----- (1) Executive officer of the Registrant. (2) Each officer has been elected by the Board of Directors to serve until removed or until a successor is elected and qualified, and has served continuously as an officer since first elected.
PART II The information required under Items 5 through 8 is included in the 1995 Annual Report to Shareholders and such information is incorporated herein by reference as indicated by the following table.
Incorporated by Reference to Captions and Pages of the 1995 Annual Report ------------------------------------- Item 5. Market for the Registrant's Quarterly Financial Information Capital Stock and Related (Unaudited) on page 32. Stockholder Matters Item 6. Selected Financial Data Ten-Year Financial Highlights (information with respect to the years 1991 to 1995) on pages 34 and 35. Item 7. Management's Discussion and Management's Discussion & Analysis Analysis of Financial Condition on pages 15 to 23. and Results of Operations Item 8. Financial Statements and Item 14(a)1. herein and Quarterly Supplementary Data Financial Information (Unaudited) on page 32. Item 9. Changes in and Disagreements Not applicable. on Accounting and Financial Disclosure
PART III ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT Incorporated herein by reference is the information set forth in Part I under the caption "Officers of the Registrant," and the information set forth under the caption "Election of Directors" in the company's definitive proxy statement to be filed with the Securities and Exchange Commission within 120 days after June 30, 1995 ("1995 Proxy Statement"). ITEM 11. EXECUTIVE COMPENSATION Incorporated herein by reference is the information set forth under the caption "Compensation of Executive Officers" and certain information regarding directors' fees under the caption "Board of Directors and Board Committees" in the 1995 Proxy Statement. ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT Incorporated herein by reference is the information set forth under the caption "Ownership of Capital Stock by Directors, Nominees and Executive Officers" with respect to the directors' and officers' shareholdings and under the caption "Principal Holders of Voting Securities" with respect to other beneficial owners in the 1995 Proxy Statement. ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS Incorporated herein by reference is certain information set forth in the notes to the table under the caption "Election of Directors" and under the caption "Certain Transactions" in the 1995 Proxy Statement. PART IV ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES, AND REPORTS ON FORM 8-K (a) Documents filed as part of this Form 10-K report. 1. Financial Statements The consolidated balance sheets as of June 30, 1995 and 1994, the consolidated statements of income, shareholders' equity, and cash flows for each of the three years in the period ended June 30, 1995,and the notes to consolidated financial statements, together with the report thereon of Arthur Andersen LLP dated July 24, 1995, presented in the company's 1995 Annual Report to Shareholders, are incorporated herein by reference. 2. Financial Statement Schedules The financial statement schedules shown below should be read in conjunction with the financial statements contained in the 1995 Annual Report to Shareholders. Other schedules are omitted because they are not applicable or the required information is shown in the financial statements or notes thereto. Separate financial statements of the company are omitted because the company is primarily an operating company and all significant subsidiaries included in the consolidated financial statements are wholly-owned, with the exception of Kennametal Hertel AG, in which the company has a 91 percent interest. Financial Statement Schedules: Report of Independent Public Accountants II - Valuation and Qualifying Accounts for the Three Years Ended June 30, 1995 3. Exhibits (3) Articles of Incorporation and Bylaws (3.1) Amended and Restated Exhibit 3.1 of the company's Articles of Incorporation September 30, 1994 Form 10-Q as Amended is incorporated herein by reference. (3.2) Bylaws Exhibit 3.1 of the company's March 31, 1991 Form 10-Q is incorporated herein by reference. (4) Instruments Defining the Rights of Security Holders, Including Indentures (4.1) Rights Agreement dated Exhibit 4 of the company's October 25, 1990 Form 8-K dated October 23, 1990 is incorporated herein by reference. (4.2) Form of Note Agreement Exhibit 4.3 of the company's with various creditors 1990 Form 10-K is incorporated dated as of May 1, 1990 herein by reference. Note: Copies of instruments with respect to long-term debt or capitalized lease obligations which do not exceed 10% of consolidated assets will be furnished to the Securities and Exchange Commission upon request. (10) Material Contracts (10.1)* Management Performance The discussion regarding Bonus Plan the Management Performance Bonus Plan under the caption "Report of the Board of Directors Committee on Executive Compensation" contained in the company's 1995 Proxy Statement is incorporated herein by reference. (10.2)* Stock Option Plan Exhibit 10.3 of the company's of 1982, as amended December 31, 1985 Form 10-Q is incorporated herein by reference. (10.3)* Stock Option and Exhibit 10.1 of the company's Incentive Plan of 1988 December 31, 1988 Form 10-Q is incorporated herein by reference. (10.4)* Form of Stock Option Exhibit 10.2 of the company's Agreement with respect December 31, 1988 Form 10-Q to the Plan set forth is incorporated herein by as Exhibit 10.3 hereof reference. (10.5)* Officer employment Exhibit 10.3 of the company's agreements, as amended 1988 Form 10-K is incorporated and restated herein by reference. (10.6)* Deferred Fee Plan for Exhibit 10.4 of the company's Outside Directors 1988 Form 10-K is incorporated herein by reference. (10.7)* Executive Deferred Exhibit 10.5 of the company's Compensation Trust 1988 Form 10-K is incorporated Agreement herein by reference. (10.8)* Form of Employment Exhibit 10.8 of the company's Agreement with certain 1990 Form 10-K is incorporated executive officers herein by reference. (10.9)* Stock Option and Exhibit 10.1 of the company's Incentive Plan of 1992 September 30, 1992 Form 10-Q is incorporated herein by reference. (10.10)* Directors Stock Exhibit 10.2 of the company's Incentive Plan September 30, 1992 Form 10-Q is incorporated herein by reference. (10.11)* Severance Agreement Exhibit 10.11 of the company's executed by and between 1993 Form 10-K is incorporated Kennametal Inc. and herein by reference. H. L. Dykema (10.12) Credit Agreement dated Exhibit 10.12 of the company's as of July 29, 1993 1993 Form 10-K is incorporated by and among Kennametal herein by reference. Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association (10.13) Underwriting Agreement Exhibit 1.1 of the company's (U.S. Version) March 31, 1994 Form 10-Q is incorporated herein by reference. (10.14) Underwriting Agreement Exhibit 1.2 of the company's (International Version) March 31, 1994 Form 10-Q is incorporated herein by reference. (10.15) Amendment No. 1 dated Exhibit 10.15 of the company's as of October 26, 1993 June 30, 1994 Form 10-K is to Credit Agreement incorporated herein by dated as of July 29, 1993 reference. by and among Kennametal Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association (10.16) Amendment No. 2 dated Exhibit 10.16 of the company's as of June 15, 1994 to June 30, 1994 Form 10-K is Credit Agreement dated incorporated herein by as of July 29, 1993 by reference. and among Kennametal Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association (13) Annual Report to Shareholders Portions of the 1995 Annual Report are filed herewith. (21) Subsidiaries of the Registrant Filed herewith. (23) Consent of Independent Public Filed herewith. Accountants (27) Financial Data Schedule Filed herewith. (b) Reports on Form 8-K. No reports on Form 8-K were filed during the quarter ended June 30, 1995. ------------------------------------------- * Denotes management contract or compensatory plan or arrangement. SIGNATURES Pursuant to the requirements of Section 13 or 15 (d) of the Securities Exchange Act of 1934, the company has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized. KENNAMETAL INC. By RICHARD J. ORWIG ------------------------------- Richard J. Orwig Vice President, Chief Financial and Administrative Officer Date: September 19, 1995 Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
Signature Title Date --------- ----- ---- QUENTIN C. MCKENNA ------------------------------ Quentin C. McKenna Chairman of the Board September 19, 1995 ROBERT L. MCGEEHAN ------------------------------ Robert L. McGeehan President, Chief Executive September 19, 1995 Officer and Director JAMES R. BREISINGER ------------------------------ James R. Breisinger Vice President, Controller September 19, 1995 and Chief Accounting Officer RICHARD J. ORWIG ------------------------------ Richard J. Orwig Vice President, Chief September 19, 1995 Financial and Administrative Officer RICHARD C. ALBERDING ------------------------------ Richard C. Alberding Director September 19, 1995 PETER B. BARTLETT ------------------------------ Peter B. Bartlett Director September 19, 1995 ROBERT N. ESLYN ------------------------------ Robert N. Eslyn Director September 19, 1995 A. PETER HELD ------------------------------ A. Peter Held Director September 19, 1995 WARREN H. HOLLINSHEAD ------------------------------ Warren H. Hollinshead Director September 19, 1995 ALOYSIUS T. MCLAUGHLIN, JR. ------------------------------ Aloysius T. McLaughlin, Jr. Director September 19, 1995 WILLIAM R. NEWLIN ------------------------------ William R. Newlin Director September 19, 1995 LARRY YOST ------------------------------ Larry Yost Director September 19, 1995
REPORT OF INDEPENDENT PUBLIC ACCOUNTANTS ON FINANCIAL STATEMENT SCHEDULES To the Board of Directors and Shareholders of Kennametal Inc. We have audited, in accordance with generally accepted auditing standards, the financial statements included in Kennametal Inc.'s annual report to shareholders incorporated by reference in this Form 10-K, and have issued our report thereon dated July 24, 1995. Our audit was made for the purpose of forming an opinion on those statements taken as a whole. The schedules listed in the index in Item 14(a)2 of this Form 10-K are the responsibility of the Company's management and are presented for purposes of complying with the Securities and Exchange Commission's rules and are not a part of the basic financial statements. These schedules have been subjected to the auditing procedures applied in the audit of the basic financial statements and, in our opinion, fairly state in all material respects the financial data required to be set forth therein in relation to the basic financial statements taken as a whole. ARTHUR ANDERSEN LLP Pittsburgh, Pennsylvania July 24, 1995 KENNAMETAL INC. SCHEDULE II VALUATION AND QUALIFYING ACCOUNTS FOR THE THREE YEARS ENDED JUNE 30, 1995 ---------------------------------------------------------------------------------------------------------------------- (Dollars in thousands)
Additions ---------------------------------------- Balance at Charged to Deductions Balance at Beginning of Costs and Other from End of Description Year Expenses Recoveries Adjustments Reserves (c) Year ----------- ------------ ---------- ---------- ----------- ------------- ---------- 1995 ---- Allowance for doubtful accounts $9,328 $1,477 $237 $2,131 (a) $1,067 $12,106 ====== ====== ==== ====== ====== ======= 1994 ---- Allowance for doubtful accounts $2,062 $ 608 $334 $6,682 (b) $ 358 $ 9,328 ====== ===== ==== ====== ====== ======= 1993 ---- Allowance for doubtful accounts $2,054 $ 754 $247 $ - $ 993 $ 2,062 ====== ====== ==== ====== ====== ======= (a) Represents foreign currency translation adjustment. (b) Represents the allowance recognized in connection with the purchase of an 81 percent interest in Hertel AG. (c) Represents uncollected accounts charged against the allowance.
EXHIBIT INDEX Exhibit No. Reference ------- ------------------------------------ 3.1 Amended and Restated Articles Exhibit 3.1 of the company's of Incorporation as Amended September 30, 1994 Form 10-Q is incorporated herein by reference. 3.2 Bylaws Exhibit 3.1 of the company's March 31, 1991 Form 10-Q is incorporated herein by reference. 4.1 Rights Agreement dated Exhibit 4 of the company's October 25, 1990 Form 8-K dated October 23, 1990 is incorporated herein by reference. 4.2 Form of Note Agreement with Exhibit 4.3 of the company's 1990 various creditors dated as Form 10-K is incorporated herein of May 1, 1990 by reference. 10.1 Management Performance The discussion regarding the Bonus Plan Management Performance Bonus Plan under the caption "Report of the Board of Directors Committee on Executive Compensation" contained in the company's 1995 Proxy Statement is incorporated herein by reference. 10.2 Stock Option Plan of 1982, Exhibit 10.3 of the company's as amended December 31, 1985 Form 10-Q is incorporated herein by reference. 10.3 Stock Option and Exhibit 10.1 of the company's Incentive Plan of 1988 December 31, 1988 Form 10-Q is incorporated herein by reference. 10.4 Form of Stock Option Exhibit 10.2 of the company's Agreement with respect to December 31, 1988 Form 10-Q is the Plan set forth as incorporated herein by reference. Exhibit 10.3 hereof 10.5 Officer employment agreements, Exhibit 10.3 of the company's 1988 as amended and restated Form 10-K is incorporated herein by reference. 10.6 Deferred Fee Plan for Exhibit 10.4 of the company's 1988 Outside Directors Form 10-K is incorporated herein by reference. 10.7 Executive Deferred Exhibit 10.5 of the company's 1988 Compensation Trust Form 10-K is incorporated herein by Agreement reference. 10.8 Form of Employment Agreement Exhibit 10.8 of the company's 1990 with certain executive officers Form 10-K is incorporated herein by reference. 10.9 Stock Option and Exhibit 10.1 of the company's Incentive Plan of 1992 September 30, 1992 Form 10-Q is incorporated herein by reference. 10.10 Directors Stock Incentive Plan Exhibit 10.2 of the company's September 30, 1992 Form 10-Q is incorporated herein by reference. 10.11 Severance Agreement executed Exhibit 10.11 of the company's 1993 by and between Kennametal Inc. Form 10-K is incorporated herein by and H.L. Dykema reference. 10.12 Credit Agreement dated as of Exhibit 10.12 of the company's 1993 July 29, 1993 by and among Form 10-K is incorporated herein by Kennametal Inc. and Deutsche reference. Bank AG, Mellon Bank N.A. and PNC Bank, National Association 10.13 Underwriting Agreement Exhibit 1.1 of the company's (U.S. Version) March 31, 1994 Form 10-Q is incorporated herein by reference. 10.14 Underwriting Agreement Exhibit 1.2 of the company's (International Version) March 31, 1994 Form 10-Q is incorporated herein by reference. 10.15 Amendment No. 1 dated as of Exhibit 10.15 of the company's October 26, 1993 to Credit June 30, 1994 Form 10-K is Agreement dated as of incorporated herein by reference. July 29, 1993 by and among Kennametal Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association 10.16 Amendment No. 2 dated as of Exhibit 10.16 of the company's June 15, 1994 to Credit June 30, 1994 Form 10-K is Agreement dated as of incorporated herein by reference. July 29, 1993 by and among Kennametal Inc. and Deutsche Bank AG, Mellon Bank N.A. and PNC Bank, National Association 13 Annual Report to Shareholders Portions of the 1995 Annual Report are filed herewith. 21 Subsidiaries of the Registrant Filed herewith. 23 Consent of Independent Public Filed herewith. Accountants 27 Financial Data Schedule Filed herewith.
                                                               EXHIBIT 13

                        KENNAMETAL INC. 1995 ANNUAL REPORT

                                    (Page 15)

MANAGEMENT'S DISCUSSION AND ANALYSIS

MATTERS AFFECTING COMPARABILITY

HERTEL ACQUISITION. In fiscal 1994, Kennametal acquired 81 percent 
(subsequently increased to 91 percent during 1995) of the shares of Hertel AG, 
a manufacturer of metalcutting tools and tooling systems based in Fuerth, 
Germany. The results of operations for 1994 included the results of Hertel AG 
and its subsidiaries for 11 months. The fair values of assets acquired and 
liabilities assumed were $241 million and $194 million, respectively.

RESTRUCTURING OF OPERATIONS. In connection with the acquisition of Hertel, 
Kennametal incurred a restructuring charge of $24.7 million ($20.4 million 
after taxes) in 1994 for costs associated with closing its manufacturing 
facility in Neunkirchen, Germany, and other integration activities.

ACCOUNTING CHANGES. In 1995, Kennametal adopted Statement of Financial 
Accounting Standards (SFAS) No. 112, "Employers' Accounting for Postemployment 
Benefits." Under this new accounting rule, employers must accrue the cost of 
separation and other benefits provided to former or inactive employees after 
employment but before retirement. The adoption of this standard did not have a 
material effect on the results of operations or financial position of the 
company.

In 1994, Kennametal changed its methods of accounting for postretirement 
health care and life insurance benefits (SFAS No. 106) and income taxes (SFAS
No. 109). The net cumulative effect of these accounting changes resulted in a 
reduction in net income of $15 million. While these accounting changes did not 
affect cash flows in 1994, they significantly increased deferred tax assets 
and other noncurrent liabilities.

                                    (Page 16)



CONSOLIDATED STATEMENTS OF INCOME

Year Ended June 30 1995 1994 1993 ------------------ ---- ---- ---- In thousands, except per share data OPERATIONS Net sales $983,873 $802,513 $598,496 Cost of goods sold 560,867 472,533 352,773 -------- -------- -------- Gross profit 423,006 329,980 245,723 Research and development expenses 18,744 15,201 14,714 Selling, marketing and distribution expenses 219,271 189,487 144,850 General and administrative expenses 55,853 58,612 41,348 Restructuring charge - 24,749 - Amortization of intangibles 2,165 3,996 3,425 Patent litigation settlement - - (1,738) -------- -------- -------- Operating income 126,973 37,935 43,124 Interest expense 12,793 13,811 9,549 Other income (expense) (886) 2,291 519 -------- -------- -------- Income before taxes and cumulative effect of accounting changes 113,294 26,415 34,094 Provision for income taxes 45,000 15,500 14,000 -------- -------- -------- Income before cumulative effect of accounting changes 68,294 10,915 20,094 Cumulative effect of accounting changes, net of income taxes: Postretirement benefits - (20,060) - Income taxes - 5,057 - -------- -------- -------- Net income (loss) $ 68,294 $ (4,088) $ 20,094 ======== ======== ======== PER SHARE DATA Earnings before cumulative effect of accounting changes $ 2.58 $ 0.45 $ 0.93 Cumulative effect of accounting changes: Postretirement benefits - (0.83) - Income taxes - 0.21 - -------- -------- -------- Earnings (loss) per share $ 2.58 $ (0.17) $ 0.93 ======== ======== ======== Dividends per share $ 0.60 $ 0.58 $ 0.58 ======== ======== ======== Weighted average shares outstanding 26,486 24,304 21,712 ======== ======== ======== The accompanying notes are an integral part of these statements.
(Page 17) MANAGEMENT'S DISCUSSION AND ANALYSIS (CONTINUED) RESULTS OF OPERATIONS NET SALES. Net sales increased 23 percent and 34 percent in 1995 and 1994, respectively. Excluding the acquisition of Hertel, sales in 1994 increased 9 percent. Sales in 1995 rose primarily because of higher sales volume, favorable foreign currency translation effects and modest price increases. Sales in 1994 increased primarily from higher sales volume, partially offset by negative currency translation effects. Sales volume increased 17 percent and 10 percent in 1995 and 1994, respectively. Sales in the United States increased 17 percent and 18 percent in 1995 and 1994, respectively. Excluding the acquisition of Hertel, sales in the United States increased 14 percent in 1994. International sales rose 33 percent and 78 percent in 1995 and 1994, respectively. Most of the sales increase in 1994 related to the acquisition of Hertel. Worldwide sales of metalworking products increased 25 percent and 41 percent in 1995 and 1994, respectively. Excluding the acquisition of Hertel, worldwide sales of metalworking products increased 11 percent in 1994. Sales increased primarily due to higher sales volume and modest price increases in both years. In the United States, sales of traditional metalcutting products increased 16 percent and 11 percent in 1995 and 1994, respectively, primarily because of increased volume. In addition, sales of industrial supplies rose 25 percent and 22 percent, respectively, primarily because of higher sales volume and additional satellite branches in the direct mail operations. Sales of mining and construction products increased 6 percent and 2 percent in 1995 and 1994, respectively. Increased demand for mining and construction tools in the United States was largely offset by lower international demand. Sales of metallurgical products increased 27 percent and 19 percent, respectively, due to strong demand for carbide intermediate and diamond matrix powders in 1995 and hardfacing products in 1994. COSTS AND EXPENSES. As a percentage of sales, the gross profit margin was 43.0 percent in 1995 and 41.1 percent in 1994 and 1993. The improvement in 1995 resulted from a better sales mix, favorable foreign currency impacts of international sales manufactured in the United States and improved manufacturing efficiency. In addition, higher raw material costs were generally offset by increased selling prices. Operating expenses increased 12 percent in 1995 primarily because of costs necessary to support the higher sales volume and increased spending on research and development and marketing activities. Operating expenses increased 31 percent in 1994 primarily because of the acquisition of Hertel. As a percentage of sales, operating expenses declined to 29.9 percent in 1995 as compared with 32.8 percent in 1994 and 33.6 percent in 1993 because of higher sales volume and improved operating efficiency, particularly in Europe. Average total employment increased 5 percent in 1995 primarily because of increased production levels in the manufacturing operations. Average total employment increased 31 percent in 1994 because of the acquisition of Hertel. NET INCOME. Net income was $68.3 million, $31.3 million (before the restructuring charge and accounting changes discussed previously) and $20.1 million in 1995, 1994 and 1993, respectively. Earnings increased in 1995 and 1994 primarily because of higher sales volume, a more favorable sales mix and improved operating efficiency. The acquisition of Hertel reduced earnings by $2.6 million in 1994. Earnings in 1995, however, increased substantially as the result of improved economic conditions and the successful turnaround and integration of Hertel in Europe. EFFECTS OF INFLATION. Despite modest inflation in recent years, rising costs continue to affect the company's businesses throughout the world. Kennametal strives to minimize the effects of inflation through cost containment, productivity efforts and price increases under highly competitive conditions. OUTLOOK. In looking to fiscal 1996, management expects continued growth in sales of metalworking products throughout the world. Sales of metalcutting products in the United States should benefit from continued expansion of the U.S. economy, opportunities in milling and drilling applications, and the strategic marketing alliance with W. W. Grainger. Sales of industrial supply products should continue to increase from expansion of direct mail and full service supply. Sales in Europe and Asia-Pacific should continue to benefit from the enhanced product offerings and technical expertise of Kennametal and Hertel in those regions. In addition, sales of mining and construction tools should continue to increase from selected opportunities in existing markets and developing opportunities in China and Poland. (Page 18)
CONSOLIDATED BALANCE SHEETS As of June 30 1995 1994 ------------- ---- ---- In thousands ASSETS Current Assets: Cash and equivalents $ 10,827 $ 17,190 Accounts receivable, less allowance for doubtful accounts of $12,106 and $9,328 175,405 143,691 Inventories 200,680 158,179 Deferred income taxes 22,362 13,744 -------- -------- Total current assets 409,274 332,804 -------- -------- Property, Plant and Equipment: Land and buildings 151,905 138,956 Machinery and equipment 365,275 328,696 Less accumulated depreciation (256,838) (224,554) -------- -------- Net property, plant and equipment 260,342 243,098 -------- -------- Other Assets: Investments in affiliated companies 6,873 6,393 Intangible assets, less accumulated amortization of $19,009 and $16,540 32,253 32,141 Deferred income taxes 56,629 65,606 Other 16,238 17,490 -------- -------- Total other assets 111,993 121,630 -------- -------- Total assets $781,609 $697,532 ======== ======== LIABILITIES Current Liabilities: Current maturities of term debt and capital leases $ 17,475 $ 4,364 Notes payable to banks 53,555 52,753 Accounts payable 60,211 52,148 Accrued vacation pay 18,424 15,569 Other 75,537 77,193 -------- -------- Total current liabilities 225,202 202,027 -------- -------- Term Debt and Capital Leases, Less Current Maturities 78,700 90,178 Deferred Income Taxes 20,998 19,279 Other Liabilities 51,615 51,800 -------- -------- Total liabilities 376,515 363,284 -------- -------- Minority Interest in Consolidated Subsidiaries 13,209 11,412 -------- -------- SHAREHOLDERS' EQUITY Shareholders' Equity: Preferred stock, 5,000 shares authorized; none issued - - Capital stock, $1.25 par value; 70,000 and 30,000 shares authorized; 29,370 shares issued 36,712 36,712 Additional paid-in capital 85,768 83,839 Retained earnings 297,838 245,428 Treasury shares, at cost; 2,793 and 3,015 shares held (36,737) (39,247) Cumulative translation adjustments 8,304 (3,360) Pension liability adjustment - (536) Total shareholders' equity 391,885 322,836 -------- -------- Total liabilities and shareholders' equity $781,609 $697,532 ======== ======== The accompanying notes are an integral part of these statements.
(Page 19) MANAGEMENT'S DISCUSSION AND ANALYSIS (CONTINUED) FINANCIAL CONDITION Kennametal's financial condition remains strong. Total assets were $782 million in 1995, up 12 percent from $698 million in 1994. Net working capital was $184 million, up 40 percent from the previous year. The ratio of current assets to current liabilities was 1.8 in 1995 as compared with 1.6 in 1994. Accounts receivable increased 22 percent to $175 million entirely because of increased sales. Inventories rose 27 percent to $201 million to support increased product demand and to maintain adequate supplies of essential raw materials. Inventory turnover was 3.1 in both 1995 and 1994. During the next several years, Kennametal will focus on ways to improve inventory turnover and overall asset utilization. Total debt (including capital lease obligations) increased 2 percent to $150 million in 1995. The ratio of total debt to total invested capital was 27.6 percent in 1995 as compared with 31.3 percent in 1994. In order to maintain financial flexibility and to optimize the cost of capital, Kennametal's financial objective is to maintain a debt to capital ratio of not more than 40 percent. In 1995, Kennametal substantially completed restructuring and integration activities related to the acquisition of Hertel in 1994. Cash payments and other charges applied to the restructuring reserves totaled $26.1 million in 1995. (Page 20)
CONSOLIDATED STATEMENTS OF CASH FLOWS Year Ended June 30 1995 1994 1993 ------------------ ---- ---- ---- In thousands OPERATING ACTIVITIES Net income (loss) $68,294 $(4,088) $20,094 Adjustments for noncash items: Depreciation and amortization 39,315 43,232 30,927 Other 11,953 14,984 3,202 Changes in certain assets and liabilities, net of effects from acquisitions: Accounts receivable (23,815) (11,352) (1,644) Inventories (34,389) 9,638 (1,524) Accounts payable and accrued liabilities (9,340) (18,007) (1,422) Other 4,615 (4,158) (7,615) ------- ------- ------- Net cash flow from operating activities 56,633 30,249 42,018 ------- ------- ------- INVESTING ACTIVITIES Purchases of property, plant and equipment (43,371) (27,313) (23,099) Disposals of property, plant and equipment 3,725 6,716 1,460 Acquisition of Hertel AG, net of cash - (19,595) - Other (5,268) (2,344) (2,373) ------- ------- ------- Net cash flow used for investing activities (44,914) (42,536) (24,012) ------- ------- ------- FINANCING ACTIVITIES Increase (decrease) in short-term debt (5,721) 11,246 (7,310) Increase in term debt 8,163 5,715 1,000 Reduction in term debt (9,721) (64,098) (9,266) Net proceeds from issuance of capital stock - 73,594 - Dividend reinvestment and employee stock plans 4,439 8,658 4,301 Cash dividends paid to shareholders (15,884) (14,015) (12,579) Other - 2,731 1,180 ------- ------- ------- Net cash flow from (used for) financing activities (18,724) 23,831 (22,674) ------- ------- ------- Effect of exchange rate changes on cash 642 1,497 (190) ------- ------- ------- CASH AND EQUIVALENTS Net increase (decrease) in cash and equivalents (6,363) 13,041 (4,858) Cash and equivalents, beginning 17,190 4,149 9,007 ------- ------- ------- Cash and equivalents, ending $10,827 $17,190 $ 4,149 ======= ======= ======= SUPPLEMENTAL DISCLOSURES Interest paid $12,569 $12,403 $ 9,617 Income taxes paid 23,125 16,296 13,232 ------- ------- ------- The accompanying notes are an integral part of these statements.
(Page 21) MANAGEMENT'S DISCUSSION AND ANALYSIS (CONTINUED) LIQUIDITY AND CAPITAL RESOURCES Kennametal's cash flow from operations is a primary source of financing for capital expenditures and internal growth. In addition, the company maintains global credit lines with commercial banks totaling $219 million, of which $165 million was unused at June 30, 1995. The company's non-U.S. subsidiaries and affiliates generally obtain local financing through credit lines with commercial banks. Kennametal generated net cash flow from operations of $57 million, $30 million and $42 million in 1995, 1994 and 1993, respectively. Cash flow increased in 1995 as a result of increased earnings, which was partially offset by higher working capital requirements. Cash flow decreased in 1994 primarily because of increased working capital requirements and payments for Hertel integration costs. Capital expenditures totaled $43 million, $27 million and $23 million in 1995, 1994 and 1993, respectively. Investments were made to modernize facilities, upgrade machinery and equipment, and acquire new information technology. Capital expenditures for 1996 are estimated to be $60 - 70 million and will be used primarily to upgrade machinery and equipment and acquire new information technology. As a public company, Kennametal also maintains access to global capital markets for potential offerings of debt and equity securities. In 1994, Kennametal issued approximately 4 million shares of capital stock for net proceeds of $73.6 million. The proceeds were used to repay a bridge loan ($38.7 million) and certain borrowings under revolving credit agreements ($34.9 million). (Page 22)
CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY Year Ended June 30 1995 1994 1993 ------------------ ---- ---- ---- In thousands CAPITAL STOCK Balance at beginning of year $ 36,712 $ 15,891 $ 15,891 Issuance of capital stock - 2,465 - Stock split (2-for-1) - 18,356 - -------- -------- -------- Balance at end of year 36,712 36,712 15,891 -------- -------- -------- ADDITIONAL PAID-IN CAPITAL Balance at beginning of year 83,839 28,135 27,594 Dividend reinvestment and stock purchase plan 1,015 424 144 Employee stock plans 914 2,507 397 Issuance of capital stock - 71,129 - Stock split (2-for-1) - (18,356) - -------- -------- -------- Balance at end of year 85,768 83,839 28,135 -------- -------- -------- RETAINED EARNINGS Balance at beginning of year 245,428 263,531 256,016 Net income (loss) 68,294 (4,088) 20,094 Cash dividends (15,884) (14,015) (12,579) -------- -------- -------- Balance at end of year 297,838 245,428 263,531 -------- -------- -------- TREASURY SHARES Balance at beginning of year (39,247) (44,974) (48,734) Dividend reinvestment and stock purchase plan 938 590 1,567 Employee stock plans 1,572 5,137 2,193 -------- -------- -------- Balance at end of year (36,737) (39,247) (44,974) -------- -------- -------- CUMULATIVE TRANSLATION ADJUSTMENTS Balance at beginning of year (3,360) (7,442) 744 Current year translation adjustments 11,664 4,082 (8,186) -------- -------- -------- Balance at end of year 8,304 (3,360) (7,442) -------- -------- -------- PENSION LIABILITY ADJUSTMENT Balance at beginning of year (536) - - Minimum pension liability adjustment 536 (536) - -------- -------- -------- Balance at end of year - (536) - -------- -------- -------- Total shareholders' equity, June 30 $391,885 $322,836 $255,141 ======== ======== ======== The accompanying notes are an integral part of these statements.
(Page 23) MANAGEMENT'S DISCUSSION AND ANALYSIS (CONTINUED)
SALES BY PRODUCT CLASS AND GEOGRAPHIC AREA Year Ended June 30 1995 1994 1993 ------------------ Percent Percent Percent of Total Amount Change Amount Change Amount In thousands -------- -------- ------- -------- ------- -------- BY PRODUCT CLASS: Metalworking products 86% $844,626 25% $676,355 41% $478,137 Mining and construction products 11 108,019 6 101,575 2 99,614 Metallurgical products 3 31,228 27 24,583 19 20,745 ---- -------- --- -------- --- -------- Net sales 100% $983,873 23% $802,513 34% $598,496 ==== ======== === ======== === ======== BY GEOGRAPHIC AREA: Within the United States 62% $606,623 17% $517,856 18% $438,910 International 38 377,250 33 284,657 78 159,586 ---- -------- --- -------- --- -------- Net sales 100% $983,873 23% $802,513 34% $598,496 ==== ======== === ======== === ========
(Page 24) NOTES TO CONSOLIDATED FINANCIAL STATEMENTS NOTE 1: SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES Management has prepared the accompanying consolidated financial statements in accordance with generally accepted accounting principles. The summary of significant accounting policies within these principles is presented below to assist in evaluating the company's financial statements. PRINCIPLES OF CONSOLIDATION. The consolidated financial statements include the accounts of the company and its majority-owned subsidiaries. All significant intercompany balances and transactions have been eliminated. CASH EQUIVALENTS. Temporary cash investments having original maturities of three months or less are considered cash equivalents. Cash equivalents consist principally of investments in money market funds and certificates of deposit. ACCOUNTS RECEIVABLE included $16.4 million and $6.3 million of receivables from affiliates at June 30, 1995 and 1994, respectively. INVENTORIES are carried at the lower of cost or market. The company uses the last-in, first-out (LIFO) method for determining the cost of a significant portion of its U.S. inventories. The remainder of inventories are determined under the first-in, first-out (FIFO) or average cost methods. PROPERTY, PLANT AND EQUIPMENT are carried at cost. Major improvements are capitalized, while maintenance and repairs are generally expensed as incurred. Retirements and disposals are removed from cost and accumulated depreciation accounts, with the gain or loss reflected in income. Interest is capitalized during the construction of major facilities. Capitalized interest is included in the cost of the constructed asset and amortized over its estimated useful life. DEPRECIATION, for financial reporting purposes, is computed using the straight-line method over the estimated useful lives of the assets ranging from 3 to 40 years. Leased property and equipment under capital leases are amortized using the straight-line method over the terms of the related leases. INTANGIBLE ASSETS, which include the excess of cost over net assets of acquired companies, are amortized using the straight-line method over periods ranging from 3 to 40 years. RESEARCH AND DEVELOPMENT costs are expensed as incurred. INCOME TAXES. Deferred income taxes are recognized based on the future income tax effects (using enacted tax laws and rates) of differences in the carrying amounts of assets and liabilities for financial reporting and tax purposes. A valuation allowance is recognized if it is "more likely than not" that some or all of a deferred tax asset will not be realized. FOREIGN CURRENCY TRANSLATION. For the most part, assets and liabilities of international operations are translated into U.S. dollars using year-end exchange rates, while revenues and expenses are translated at average exchange rates throughout the year. The resulting net translation adjustments are recorded as a separate component of shareholders' equity. PENSION PLANS cover substantially all employees. Pension benefits are based on years of service and, for certain plans, on average compensation immediately preceding retirement. Pension costs are determined in accordance with Statement of Financial Accounting Standards (SFAS) No. 87, "Employers' Accounting for Pensions." The company funds pension costs in accordance with the funding requirements of the Employee Retirement Income Security Act of 1974 (ERISA) for U.S. plans and in accordance with local regulations or customs for non-U.S. plans. CHANGES IN ACCOUNTING PRINCIPLES. In 1995, the company adopted SFAS No. 112, "Employers' Accounting for Postemployment Benefits." Under this standard, employers must accrue the cost of separation and other benefits provided to former or inactive employees after employment but before retirement. The company's previous practice was to generally accrue these costs as they arose. Therefore, the adoption of this standard did not have a material effect on the results of operations or financial position of the company. In 1994, the company adopted SFAS No. 106, "Employers' Accounting for Postretirement Benefits Other Than Pensions." Under this standard, employers must accrue the expected cost of providing postretirement health care and life insurance benefits during employees' active service. The company's previous practice was to expense these costs as incurred. The company elected to immediately recognize the cumulative postretirement benefit obligation, which resulted in a one-time charge to earnings of $34 million ($20.1 million after taxes). See also Note 9. Also in 1994, the company adopted SFAS No. 109, "Accounting for Income Taxes." Under this standard, deferred income taxes are recognized based on the future income tax effects of differences in the carrying (Page 25) NOTES TO CONSOLIDATED FINANCIAL STAEMENTS (CONTINUED) amounts of assets and liabilities for financial reporting and tax purposes. The adoption of SFAS No. 109 resulted in an increase in net income of $5.1 million. The financial statements for 1993 and prior years were accounted for under the deferred method of accounting and have not been restated. See also Note 7. NOTE 2: HERTEL ACQUISITION AND RESTRUCTURING On August 4, 1993, the company acquired 81 percent of the outstanding shares of Hertel AG (Hertel) for $43 million in cash and assumed $55 million in debt. Hertel is a manufacturer of metalcutting tools and tooling systems based in Fuerth, Germany. Since January 1, 1994, the company purchased additional shares of Hertel for $12 million, thereby increasing the company's ownership interest to 91 percent at June 30, 1995. The acquisition of Hertel was accounted for under the purchase method and, accordingly, the results of operations of Hertel have been included in the accompanying consolidated financial statements since August 1993. The purchase price was allocated to assets acquired and liabilities assumed based on fair market values at the date of acquisition. The excess of the purchase price over the fair market value of the net assets acquired was recognized as goodwill and is being amortized over 20 years. The fair values of assets acquired and liabilities assumed are summarized as follows: In thousands 1994 ------------ -------- Current assets $114,800 Property, plant and equipment 70,200 Intangible assets (goodwill) 5,300 Deferred tax assets (see Note 7) 40,600 Other noncurrent assets 10,500 Current liabilities 104,100 Long-term liabilities 89,400 Included in current liabilities was a reserve of approximately $36 million (pretax) for restructuring Hertel's operations. The restructuring costs primarily included amounts for severance, phaseout and relocation. Cash payments and other costs applied to the restructuring reserve were $19.9 million in 1995 and $16.1 million in 1994. The restructuring, which began in fiscal 1994, was substantially completed in fiscal 1995. In connection with the acquisition of Hertel, Kennametal recognized a restructuring charge in 1994 of approximately $24.7 million ($20.4 million after taxes) related to closing its manufacturing facility in Neunkirchen, Germany, and other integration activities. Cash payments and other costs applied to the restructuring reserve were $6.2 million in 1995 and $18.5 million in 1994. The restructuring was substantially completed in fiscal 1995. NOTE 3: INVENTORIES Inventories consisted of the following: In thousands 1995 1994 ------------ -------- -------- Finished goods $147,231 $112,202 Work in process and powder blends 65,231 54,831 Raw materials and supplies 24,629 20,571 -------- -------- Inventories at current cost 237,091 187,604 Less LIFO valuation (36,411) (29,425) -------- -------- Total inventories $200,680 $158,179 ======== ======== Inventories are stated at the lower of cost or market. Cost is determined using the last-in, first-out (LIFO) method for a significant portion of U.S. inventories and the first-in, first-out (FIFO) method or average cost for other inventories. The company used the LIFO method of valuing its inventories for approximately 55 percent of total inventories at June 30, 1995 and 1994. The company uses the LIFO method for valuing the majority of its inventories in order to more closely match current costs with current revenues, thereby reducing the effects of inflation on earnings. NOTE 4: OTHER CURRENT LIABILITIES Other current liabilities consisted of the following: In thousands 1995 1994 ------------ ------- ------- Accrued restructuring costs $ - $25,631 Federal and state income taxes 19,060 5,546 Accrued compensation 14,139 11,961 Payroll, state and local taxes 8,406 8,172 Accrued product warranty costs 4,779 4,651 Accrued benefits 4,089 2,074 Accrued professional fees 2,456 1,449 Accrued interest expense 1,005 1,114 Other accrued expenses 21,603 16,595 ------- ------- Total other current liabilities $75,537 $77,193 ======= ======= (Page 26) NOTES TO CONSOLIDATED FINANCIAL STAEMENTS (CONTINUED) NOTE 5: TERM DEBT AND CAPITAL LEASES Term debt and capital lease obligations consisted of the following: In thousands 1995 1994 ------------ ------- ------- Senior notes, 9.64%, due in installments through 2000 $50,000 $50,000 Industrial Revenue Notes, 8.05% tax exempt, due in 1996 833 1,667 Borrowings outside the U.S., varying from 5.75% to 10.25% (1995) and 5.0% to 10.25% (1994), due in installments through 2008 21,070 20,291 Lease of office facilities with terms expiring through 2011 at 6.75% to 7.55% 14,547 13,182 Other 9,725 9,402 ------- ------- Total term debt and capital leases 96,175 94,542 ------- ------- Less current maturities: Term debt (15,782) (2,811) Capital leases (1,693) (1,553) ------- ------- Total current maturities (17,475) (4,364) ------- ------- Long-term debt and capital leases $78,700 $90,178 ======= ======= Future principal maturities of term debt are $15.8 million, $18.3 million, $12.6 million, $12.5 million and $12.4 million, respectively, in fiscal years 1996 through 2000. Certain of the term debt agreements contain various restrictions relating to, among other things, minimum net worth, maximum indebtedness, fixed charge coverage and debt guarantees. Future minimum lease payments under capital leases for the next five years and in total are as follows: In thousands ------------ YEAR ENDING JUNE 30: 1996 $ 1,693 1997 1,693 1998 1,693 1999 1,693 2000 1,693 After 2000 14,007 ------- Total future minimum lease payments 22,472 Less amount representing interest (7,925) ------- Present value of minimum lease payments $14,547 ======= Future minimum lease payments under operating leases with noncancelable terms beyond one year were not significant at June 30, 1995. NOTE 6: NOTES PAYABLE AND LINES OF CREDIT Notes payable to banks of $53.6 million and $52.8 million at June 30, 1995 and 1994, respectively, represent short-term borrowings under U.S. and international credit lines with commercial banks. These credit lines totaled approximately $219 million at June 30, 1995, of which $165 million was unused. The weighted average interest rate for short-term borrowings was 6.1 percent and 6.0 percent at June 30, 1995 and 1994, respectively. Primary U.S. credit lines totaling $90 million are covered by a single revolving credit agreement. Borrowings under this agreement are available at fixed or variable interest rates. The credit lines expire during fiscal 1997, and require the company to pay a facility fee on the total line and a commitment fee on unborrowed amounts under one of the lines. The company has the option to terminate this agreement in whole or in part at any time. NOTE 7: INCOME TAXES Effective July 1, 1993, the company adopted SFAS No. 109, "Accounting for Income Taxes," which resulted in the recognition of net deferred tax liabilities of $5.6 million for temporary differences between the carrying amounts of assets and liabilities for financial reporting and income tax purposes, and net operating loss carryforwards in certain international operations. In connection with the adoption of SFAS No. 106, "Employers' Accounting for Postretirement Benefits Other Than Pensions," the company recognized additional deferred tax assets at July 1, 1993 of $13.9 million. The net effect of these accounting changes resulted in the recognition of net deferred tax assets of $8.3 million and an increase in net income of $5.1 million in 1994. (Page 27) NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED) Income before taxes and the provision for income taxes consisted of the following: In thousands 1995 1994 1993 ------------ -------- -------- ------- Income before taxes: United States $ 83,401 $39,095 $33,655 International 29,893 (12,680) 439 -------- ------- ------- Total income before taxes $113,294 $26,415 $34,094 ======== ======= ======= Current income taxes: Federal $ 26,500 $15,000 $ 7,100 State 6,100 3,100 2,000 International 4,000 (900) 2,000 -------- ------- ------- Total 36,600 17,200 11,100 Deferred income taxes 8,400 (1,700) 2,900 -------- ------- ------- Provision for income taxes $ 45,000 $15,500 $14,000 ======== ======= ======= Effective tax rate 39.7% 58.7% 41.1% ======== ======= ======= Note: Excluding the effects of the restructuring charge, the effective tax rate was 39.1 percent in 1994. The reconciliation of income taxes computed using the statutory U.S. income tax rate and the provision for income taxes was as follows: In thousands 1995 1994 1993 ------------ ------- ------- ------- Income taxes at U.S. statutory rate $39,653 $ 9,245 $11,592 State income taxes, net of federal tax benefits 3,981 2,018 1,331 Combined tax effects of international income 1,288 2,883 (255) International losses with no related tax benefits 219 2,325 540 Other (141) (971) 792 ------- ------- ------- Provision for income taxes $45,000 $15,500 $14,000 ======= ======= ======= Deferred tax assets and liabilities consisted of the following: In thousands 1995 1994 ------------ ------- ------- Deferred tax assets (liabilities): Net operating loss carryforwards $52,923 $50,839 Other postretirement benefits 14,122 13,972 Inventory valuation and reserves 6,643 8,071 Accrued vacation compensation 3,680 3,471 Property and equipment 2,866 2,131 Other accruals 4,463 6,626 Accumulated depreciation (20,998) (19,279) ------- ------- Total 63,699 65,831 Less valuation allowance (5,706) (5,760) ------- ------- Net deferred tax assets $57,993 $60,071 ======= ======= The sources of deferred income taxes in 1993 were as follows: In thousands 1993 ------------ ------ Patent litigation settlement $2,200 Inventory valuation and reserves 400 Depreciation 200 Accrued vacation compensation 200 Other, net (100) ------ Total $2,900 ====== Deferred income taxes have not been provided on cumulative undistributed earnings of international subsidiaries and affiliates. Any U.S. income taxes on such earnings, if distributed, would generally be offset by available foreign tax credits. In addition, there were no significant undistributed earnings of unconsolidated affiliates at June 30, 1995. Included in deferred tax assets at June 30, 1995 are unrealized tax benefits totaling $52.9 million related to net operating loss carryforwards. The realization of these tax benefits is contingent on future taxable income in certain international operations. Of this amount, approximately $47.2 million relates to net operating loss carryforwards in Germany, which can be carried forward indefinitely. The company's operations in Germany are currently profitable. The remaining unrealized tax benefits relate to net operating loss carryforwards in certain other international operations, which expire at various dates through 2002. The company established a valuation allowance of $5.7 million to offset the deferred tax benefits that may not be realized before the expiration of the carryforward periods. (Page 28) NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED) NOTE 8: PENSION BENEFITS The components of net pension cost (credit) for the company's U.S. defined benefit pension plans were as follows: In thousands 1995 1994 1993 ------------ ------- ------- ------- Service cost $ 5,906 $ 5,777 $ 6,338 Interest cost 13,016 12,345 12,644 Return on plan assets (37,746) (8,885) (27,814) Net amortization and deferral 17,628 (11,099) 9,946 -------- -------- ------- Net pension cost (credit) $ (1,196) $ (1,862) $ 1,114 ======== ======== ======= The funded status of the plans and amounts recognized in the consolidated balance sheets were as follows: In thousands 1995 1994 ------------ -------- -------- Plan assets, at fair value $231,007 $203,715 -------- -------- Present value of accumulated benefit obligations: Vested benefits 131,552 119,025 Nonvested benefits 2,933 2,881 -------- -------- Accumulated benefit obligations 134,485 121,906 Effect of future salary increases 40,550 39,442 -------- -------- Projected benefit obligations 175,035 161,348 -------- -------- Plan assets in excess of projected benefit obligations 55,972 42,367 Amounts not recognized in the financial statements: Unrecognized net assets from July 1, 1986 (16,689) (18,868) Unrecognized prior service costs 909 1,299 Unrecognized net gains (36,037) (21,959) Adjustment to recognize minimum liability - (1,624) -------- -------- Prepaid pension costs $ 4,155 $ 1,215 ======== ======== Prepaid pension costs are included in other noncurrent assets. Plan assets consist principally of common stocks, corporate bonds and U.S. government securities. The significant actuarial assumptions used to determine the present value of pension benefit obligations were as follows: 1995 1994 ----- ----- Discount rate 8.00% 8.25% Rate of future salary increases 5.00% 5.00% Rate of return on plan assets 9.00% 9.00% Pension plans of international subsidiaries are not required to report to U.S. government agencies pursuant to ERISA. The components of net pension cost for the company's significant international defined benefit pension plans were as follows: In thousands 1995 1994 ------------ ------ ---- Service cost $ 231 $143 Interest cost 967 833 ------ ---- Net pension cost $1,198 $976 ====== ==== Net pension cost for international plans was not significant in 1993. The funded status of the international plans and amounts recognized in the consolidated balance sheets were as follows: In thousands 1995 1994 ------------ ------- ------- Present value of accumulated benefit obligations: Vested benefits $11,314 $ 8,980 Nonvested benefits 2,555 2,539 ------- ------- Accumulated benefit obligations 13,869 11,519 Effect of future salary increases 143 369 ------- ------- Projected benefit obligations 14,012 11,888 Plan assets, at fair value - - ------- ------- Accrued pension costs $14,012 $11,888 ======= ======= In connection with the acquisition of Hertel, the company assumed the unfunded vested benefit obligations of Hertel. The significant actuarial assumptions used to determine the present value of pension benefit obligations for international plans were as follows: 1995 1994 ----- ----- Discount rate 7.75% 7.75% Rate of future salary increases 5.00% 5.00% Total pension cost (credit) for U.S. and international plans amounted to $0.8 million, $(1.2) million and $1.8 million in 1995, 1994 and 1993, respectively. NOTE 9: OTHER POSTRETIREMENT BENEFITS The company presently provides varying levels of postretirement health care and life insurance benefits to most U.S. employees who complete 10 years of service and retire on or after age 55. Beginning with retirements on or after January 1, 1997, postretirement health care benefits will be capped at 1996 levels. In addition, benefits will be provided to employees who retire on or after the normal retirement age of 65 and complete at least five years of service after age 40. These benefits are currently unfunded. Effective July 1, 1993, the company adopted SFAS No. 106, "Employers' Accounting for Postretirement Benefits Other Than Pensions." Under the new (Page 29) NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED) standard, the expected cost of providing such benefits must be accrued during the periods in which employees render the necessary service. The company previously expensed these costs as incurred. The cumulative effect of the change in accounting method resulted in a one-time charge to earnings of $34 million ($20.1 million after taxes) in 1994. The components of other postretirement benefit costs for the company's U.S. plans were as follows (excluding the one-time charge in 1994): In thousands 1995 1994 ------------ ------ ------ Service cost $ 959 $1,080 Interest cost 2,626 2,820 Net amortization and deferral (32) - ------ ------ Other postretirement benefit costs $3,553 $3,900 ====== ====== Other postretirement benefit costs were $1.9 million in fiscal 1993. Accumulated postretirement benefit obligations and amounts recognized in the consolidated balance sheets were as follows: In thousands 1995 1994 ------------ ------- ------- Present value of accumulated benefit obligations: Retirees $19,692 $14,800 Fully eligible active participants 6,335 8,000 Other active participants 8,604 13,000 ------- ------- Accumulated benefit obligations 34,631 35,800 Plan assets, at fair value - - ------- ------- Accumulated benefit obligations in excess of plan assets 34,631 35,800 Unrecognized net gains 2,231 - ------- ------- Accrued postretirement benefits $36,862 $35,800 ======= ======= Included in other noncurrent liabilities were accrued postretirement benefits of $33.5 million and $33.8 million at June 30, 1995 and 1994, respectively. The significant actuarial assumptions used to determine the present value of accumulated postretirement benefit obligations were as follows: 1995 1994 ----- ----- Discount rate 8.00% 8.50% Rate of increase in health care costs: Initial rate 9.00% 9.50% Ultimate rate in 2003 and after 5.00% 5.00% A one percent increase in the health care cost trend rate would increase other postretirement benefit costs by $0.2 million in 1995 and the accumulated benefit obligation by $1.6 million at June 30, 1995. NOTE 10: FINANCIAL INSTRUMENTS FAIR VALUE. The company had $10.8 million in cash and equivalents at June 30, 1995, which approximates fair value because of the short maturity of these investments. The estimated fair value of term debt was $85.2 million at June 30, 1995. Fair value was determined using discounted cash flow analysis and the company's incremental borrowing rates for similar types of arrangements. OFF-BALANCE-SHEET RISK. The company uses currency forward contracts in the normal course of business to hedge foreign currency exposures of underlying receivables and payables. These financial instruments involve credit risk in excess of the amount recognized in the financial statements. The company controls credit risk through credit evaluations, limits and monitoring procedures. There were no financial instruments with significant off-balance- sheet risk at June 30, 1995. CONCENTRATIONS OF CREDIT RISK. Financial instruments that potentially subject the company to concentrations of credit risk consist primarily of temporary cash investments and trade receivables. By policy, the company makes temporary cash investments with high credit quality financial institutions. With respect to trade receivables, concentrations of credit risk are significantly reduced because the company serves a large number of customers in many industries and geographic areas. As of June 30, 1995, the company had no significant concentrations of credit risk. NOTE 11: STOCK ISSUANCE AND STOCK SPLIT On August 1, 1994, the company's Board of Directors authorized a 2-for-1 stock split in the form of a 100 percent stock dividend payable to shareholders of record on August 10, 1994. The split resulted in the issuance in 1994 of approximately 14.7 million shares of capital stock from authorized and unissued shares. The stock split also resulted in the transfer of $18.4 million from additional paid-in capital to capital stock, representing the par value of the shares issued. All references to the number of shares and per share amounts were restated to reflect the split. On December 23, 1993, the company issued approximately 4 million shares of capital stock for net proceeds of $73.6 million. The proceeds were used to repay a bridge loan and certain borrowings under revolving credit agreements. (Page 30) NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED) NOTE 12: STOCK OPTIONS Transactions under the company's stock option plans were as follows:
1995 Option Prices Number of Shares 1995 1994 1993 Per Share ---------------- -------- -------- --------- ------------ Options outstanding, beginning of year 475,650 914,616 1,115,384 $20.53-14.06 Granted 204,950 100,000 42,000 24.75 Exercised (157,452) (508,966) (201,196) 16.94-14.22 Lapsed and forfeited (2,000) (30,000) (41,572) 16.94 -------- -------- --------- ------------ Options outstanding, end of year 521,148 475,650 914,616 $24.75-14.50 ======== ======== ========= ============ Exercisable at year-end 281,482 235,504 741,710 $24.75-14.50 ======== ======== ========= ============ Available for future grant 754,820 961,290 1,031,290 ======== ======== =========
Under stock option plans approved by shareholders in 1992 and 1988, stock options are generally granted to eligible employees at fair market value at the date of grant. Options are exercisable under specified conditions for up to 10 years from the date of grant. No options may be granted under the 1988 plan after October 1998, and no options may be granted under the 1992 plan after October 2002. No charges to income have resulted from the operation of the plans. Under provisions of the plans, participants may deliver Kennametal stock in payment of the option price and receive credit for the fair market value of the shares on the date of delivery. Shares valued at $0.4 million (13,728 shares), $1.2 million (62,934 shares) and $0.3 million (20,668 shares) were delivered in 1995, 1994 and 1993, respectively. Under the 1992 and 1988 plans, shares may be awarded to eligible employees without payment. The respective plans specify such shares are awarded in the name of the employee, who has all the rights of a shareholder, subject to certain restrictions or forfeitures. Such awards were not significant in 1995, 1994 and 1993. NOTE 13: PATENT LITIGATION SETTLEMENT In 1993, the company settled a patent infringement suit for $5.8 million in cash, which resulted in the reversal of a portion of previously established reserves of $1.7 million ($1.0 million after taxes). NOTE 14: ENVIRONMENTAL MATTERS The company has been involved in various environmental cleanup and remediation activities at several of its manufacturing facilities. In addition, the company has been named as a potentially responsible party at four Superfund sites in the United States. However, it is management's opinion, based on its evaluations and discussions with outside counsel and independent consultants, that the ultimate resolution of these environmental matters will not have a material adverse effect on the results of operations or financial position of the company. The company maintains a Corporate Environmental, Health and Safety (EH&S) Department to ensure compliance with all environmental regulations and to monitor and oversee remediation activities. In addition, the company has established an EH&S administrator at each of its domestic manufacturing facilities. The company's financial management team periodically meets with members of the Corporate EH&S Department and the Corporate Legal Department to review and evaluate the status of environmental projects and contingencies. On a quarterly and annual basis, management establishes or adjusts financial provisions and reserves for environmental contingencies in accordance with SFAS No. 5, "Accounting for Contingencies." (Page 31) NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED) Note 15: CONTRACT DISPUTE Prior to its acquisition by Kennametal, a non-U.S. subsidiary recorded sales of approximately $60 million in calendar 1993 under contracts with a certain customer to provide various equipment, know-how and training for a manufacturing facility. Upon the acquisition by Kennametal, the subsidiary decided to complete performance under the contracts with this customer but to not enter into any such contracts in the future. Pursuant to a United States embargo effective June 6, 1995, the subsidiary suspended performance under the contracts pending issuance by the U.S. government of definitive embargo regulations. Other than finalizing the transfer of know-how and training to commence production, performance was substantially completed prior to the suspension. The estimated costs to complete performance are not material and were accrued in the consolidated financial statements as of June 30, 1995. However, the customer has disputed the suspension and has advised that it may file suit to require completion of performance as well as for compensation for alleged damages. At the present time, management is unable to predict the outcome of this matter; however, management believes that the ultimate resolution of this matter will not have a material adverse impact on the financial position of the company. NOTE 16: SHAREHOLDER RIGHTS PLAN Pursuant to the company's Shareholder Rights Plan, one-half of a right is associated with each share of capital stock. Each right entitles a shareholder to buy 1/100th of a share of a new series of preferred stock at a price of $105 (subject to adjustment). The rights will be exercisable only if a person or group of persons acquires or intends to make a tender offer for 20 percent or more of the company's capital stock. If any person acquires 20 percent of the capital stock, each right will entitle the shareholder to receive that number of shares of capital stock having a market value of two times the exercise price. If the company is acquired in a merger or other business combination, each right will entitle the shareholder to purchase at the exercise price, that number of shares of the acquiring company having a market value of two times the exercise price. The rights will expire on November 2, 2000, and are subject to redemption by the company at $0.01 per right. NOTE 17: SEGMENT DATA The company operates predominantly as a tooling supplier specializing in powder metallurgy. The following table presents the company's operations by geographic area: In thousands 1995 1994 1993 ------------ --------- -------- -------- Sales: United States $ 726,977 $610,320 $512,748 International 390,358 296,702 156,183 --------- -------- -------- Total 1,117,335 907,022 668,931 --------- -------- -------- Intersegment transfers: United States 92,939 70,005 52,492 International 40,523 34,504 17,943 --------- -------- -------- Total 133,462 104,509 70,435 --------- -------- -------- Net sales $ 983,873 $802,513 $598,496 ========= ======== ======== Operating income: United States $ 95,228 $ 47,560 $ 41,190 International 36,769 (8,263) 1,483 Eliminations (5,024) (1,362) 451 --------- -------- -------- Total operating income 126,973 37,935 43,124 --------- -------- -------- Interest expense (12,793) (13,811) (9,549) Other income (expense) (886) 2,291 519 --------- -------- -------- Income before taxes $ 113,294 $ 26,415 $ 34,094 ========= ======== ======== Identifiable assets: United States $ 462,812 $422,517 $359,996 International 336,193 279,558 94,730 Eliminations (31,001) (26,455) (18,316) Corporate 13,605 21,912 11,853 --------- -------- -------- Total assets $ 781,609 $697,532 $448,263 ========= ======== ======== Intersegment transfers are accounted for at arm's-length prices reflecting prevailing market conditions within the various geographic areas. Such sales and associated costs are eliminated in the consolidated financial statements. Identifiable assets are those assets that are identified with the operations in each geographic area. Corporate assets consist mainly of cash and cash equivalents, investments in affiliated companies and other assets. Sales to a single customer did not aggregate 10 percent or more of total sales. Export sales from U.S. operations to unaffiliated customers were $27.4 million, $22.7 million and $21.7 million in 1995, 1994 and 1993, respectively. (Page 32) QUARTERLY FINANCIAL INFORMATION (UNAUDITED) SELECTED QUARTERLY FINANCIAL DATA Quarter Ended In thousands ----------------------------------------------------- except per share Sep. 30 Dec. 31 Mar. 31 Jun. 30 ---------------- -------- -------- -------- -------- FISCAL 1995: Net sales $218,838 $230,335 $268,064 $266,636 Gross profit 90,787 94,621 119,225 118,373 Net income 10,668 11,873 22,150 23,603 Earnings per share 0.40 0.45 0.84 0.89 ======== ======== ======== ======== FISCAL 1994: Net sales $175,665 $195,167 $211,809 $219,872 Gross profit 70,018 76,913 88,429 94,620 Net income (loss) (33,057) 4,088 11,090 13,791 Earnings (loss) per share (1.51) 0.18 0.43 0.52 ======== ======== ======== ======== Earnings (loss) per share were computed independently for each quarter in 1994 and, therefore, do not equal the amount computed for the entire fiscal year. In the first quarter of 1994, the company incurred a restructuring charge of $24.7 million ($20.4 million after taxes) related to the acquisition of Hertel and recognized the net cumulative effect of accounting changes of $15 million (after taxes). Net loss before the net cumulative effect of accounting changes was $18.1 million and net loss per share was $0.82. STOCK PRICE RANGES AND DIVIDENDS PAID The company's capital stock is traded on the New York Stock Exchange (symbol KMT). The approximate number of shareholders of record as of August 10, 1995, was 2,870. Stock price ranges and dividends declared and paid were as follows: Quarter Ended -------------------------------------------------- In dollars Sep. 30 Dec. 31 Mar. 31 Jun. 30 ---------- -------- -------- -------- -------- FISCAL 1995: High $28 $29 $28-5/8 $35-3/4 Low 24-1/8 23-1/4 23 26-3/4 Dividends 0.15 0.15 0.15 0.15 ======== ======== ======== ======== FISCAL 1994: High $19-1/16 $23 $29-9/16 $29-9/16 Low 15-3/8 18-3/16 21-1/16 23-1/8 Dividends 0.145 0.145 0.145 0.145 ======== ======== ======== ======== (Page 33) REPORT OF INDEPENDENT PUBLIC ACCOUNTANTS TO THE SHAREHOLDERS OF KENNAMETAL INC. We have audited the accompanying consolidated balance sheets of Kennametal Inc. and subsidiaries as of June 30, 1995 and 1994, and the related consolidated statements of income, shareholders' equity and cash flows for each of the three years in the period ended June 30, 1995. These financial statements are the responsibility of the company's management. Our responsibility is to express an opinion on these financial statements based on our audits. We conducted our audits in accordance with generally accepted auditing standards. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion. In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Kennametal Inc. and subsidiaries as of June 30, 1995 and 1994, and the results of its operations and its cash flows for each of the three years in the period ended June 30, 1995, in conformity with generally accepted accounting principles. As discussed in Notes 7 and 9 to the consolidated financial statements, effective July 1, 1993, the company changed its methods of accounting for income taxes and postretirement benefits other than pensions. ARTHUR ANDERSEN LLP ------------------- Arthur Andersen LLP Pittsburgh, Pennsylvania July 24, 1995 (Page 34) TEN-YEAR FINANCIAL HIGHLIGHTS
10-Year Notes CAGR 1995 1994 ----- ------- -------- -------- Dollars in thousands, except per share data OPERATING RESULTS Net sales 11.2% $983,873 $802,513 Cost of goods sold 11.1 560,867 472,533 Research and development 4.9 18,744 15,201 Selling, marketing and distribution 12.7 219,271 189,487 General and administrative 6.4 55,853 58,612 Interest expense 11.6 12,793 13,811 Unusual or nonrecurring items (1) n.m. - 24,749 Income taxes 11.4 45,000 15,500 Accounting changes, net of tax (2) n.m. - 15,003 Net income (loss) (3) 13.6 68,294 (4,088) ----- -------- -------- FINANCIAL POSITION Net working capital 3.9% $184,072 $130,777 Inventories 5.4 200,680 158,179 Property, plant and equipment, net 7.3 260,342 243,098 Total assets 9.1 781,609 697,532 Long-term debt, including capital leases 8.7 78,700 90,178 Total debt, including capital leases 12.4 149,730 147,295 Total shareholders' equity (4) 6.1 391,885 322,836 ----- -------- -------- PER SHARE DATA Earnings (loss) (3) 13.0% $ 2.58 $ (0.17) Dividends 4.4 0.60 0.58 Book value (at year-end) 5.5 14.75 12.25 Market price (at year-end) 13.4 34.50 24.63 ----- -------- -------- OTHER DATA Capital expenditures 6.0% $ 43,371 $ 27,313 Number of employees (at year-end) 2.5 7,030 6,600 Average shares outstanding (in thousands) (4) 0.5 26,486 24,304 ----- -------- -------- KEY RATIOS Sales growth 22.6% 34.1% Gross profit margin 43.0 41.1 Operating profit margin 13.1 8.3 Return on sales (3) 6.9 n.m. Return on equity (3) 19.3 n.m. Total debt to capital 27.6 31.3 Dividend payout 23.3 n.m. Inventory turnover 3.1x 3.1x Average sales per employee 8.9% $ 146 $ 125 ----- -------- -------- n.m. - Not meaningful CAGR - Compound annual growth rate Note 1. Unusual charges (credits) reflect restructuring and integration costs associated with the acquisition of Hertel AG in 1994, settlement and partial reversal of accrued patent litigation costs in 1993, accrued patent litigation costs in 1991, and rationalization of production facilities and disposition of certain assets in 1986. 2. Accounting changes in 1994 reflect changes in the methods of accounting for postretirement health care and life insurance benefits (SFAS No. 106) and income taxes (SFAS No. 109). 3. Excluding unusual charges and accounting changes in 1994, net income was $31,330; earnings per share were $1.29; return on sales was 3.9 percent; and return on equity was 11.4 percent. 4. In 1994, the company issued approximately 4 million shares of capital stock for net proceeds of $73.6 million. In 1986, the company repurchased approximately 4.8 million shares of capital stock for $60 million.
(Page 35) TEN-YEAR FINANCIAL HIGHLIGHTS (CONTINUED)
1993 1992 1991 1990 1989 1988 1987 1986 -------- -------- -------- -------- -------- -------- -------- -------- Dollars in thousands, except per share data OPERATING RESULTS Net sales $598,496 $594,533 $617,833 $589,023 $472,200 $419,900 $354,450 $355,377 Cost of goods sold 352,773 362,967 358,529 342,434 274,929 244,026 205,682 217,999 Research and development 14,714 13,656 14,750 13,325 11,969 9,757 10,265 11,783 Selling, marketing and distribution 144,850 137,494 136,319 123,286 94,934 84,820 72,400 70,175 General and administrative 41,348 45,842 49,219 42,648 31,443 29,497 29,767 29,209 Interest expense 9,549 10,083 11,832 10,538 8,960 8,601 7,246 7,707 Unusual or nonrecurring items (1,738) - 6,350 - - - - 20,402 Income taxes 14,000 8,100 17,300 23,000 20,900 19,100 14,400 200 Accounting changes, net of tax - - - - - - - - Net income (loss) 20,094 12,872 21,086 32,113 29,994 24,319 17,200 571 -------- -------- -------- -------- -------- -------- -------- -------- FINANCIAL POSITION Net working capital $120,877 $108,104 $ 88,431 $108,954 $ 91,032 $ 99,565 $102,271 $101,442 Inventories 115,230 118,248 119,767 114,593 105,033 96,473 92,232 86,956 Property, plant and equipment, net 192,305 200,502 193,830 175,523 166,390 161,788 139,815 126,734 Total assets 448,263 472,167 476,194 451,379 383,252 359,258 326,994 300,024 Long-term debt, including capital leases 87,891 95,271 73,113 81,314 57,127 74,405 72,085 69,286 Total debt, including capital leases 110,628 127,954 130,710 116,212 95,860 103,982 93,303 79,928 Total shareholders' equity 255,141 251,511 243,535 231,598 204,465 186,238 166,190 153,325 -------- -------- -------- -------- -------- -------- -------- -------- PER SHARE DATA Earnings (loss) $ 0.93 $ 0.60 $ 1.00 $ 1.54 $ 1.45 $ 1.19 $ 0.85 $ 0.03 Dividends 0.58 0.58 0.58 0.58 0.56 0.52 0.485 0.43 Book value (at year-end) 11.64 11.64 11.42 11.02 9.84 9.04 8.15 7.58 Market price (at year-end) 16.75 17.13 17.81 17.25 15.88 18.38 15.44 11.50 -------- -------- -------- -------- -------- -------- -------- -------- OTHER DATA Capital expenditures $ 23,099 $ 36,555 $ 55,323 $ 35,998 $ 28,491 $ 46,336 $ 34,111 $ 24,083 Number of employees (at year-end) 4,850 4,980 5,360 5,580 5,420 4,990 4,760 4,800 Average shares outstanding (in thousands) 21,712 21,452 21,094 20,872 20,696 20,526 20,322 20,582 -------- -------- -------- -------- -------- -------- -------- -------- KEY RATIOS Sales growth 0.7% (3.8)% 4.9% 24.7% 12.5% 18.5% (0.3)% 4.1% Gross profit margin 41.1 38.9 42.0 41.9 41.8 41.9 42.0 38.7 Operating profit margin 7.5 5.8 9.6 11.4 12.5 12.3 10.3 7.4 Return on sales 3.4 2.2 3.4 5.5 6.4 5.8 4.9 0.2 Return on equity 8.1 5.2 8.7 14.9 15.4 13.9 10.9 0.4 Total debt to capital 30.2 33.7 34.9 33.4 31.9 35.8 36.0 34.3 Dividend payout 62.4 96.7 58.0 37.7 38.6 43.7 57.1 n.m. Inventory turnover 3.1x 3.0x 3.0x 3.1x 2.9x 2.4x 2.3x 2.1x Average sales per employee $ 122 $ 116 $ 113 $ 107 $ 94 $ 85 $ 75 $ 71 -------- -------- -------- -------- -------- -------- -------- --------
                                                              EXHIBIT 21 
 
 
                             PRINCIPAL SUBSIDIARIES 
 
 
                                                     Jurisdiction in Which 
       Name of Subsidiary                          Organized or Incorporated 
       ------------------                          ------------------------- 
 
CONSOLIDATED SUBSIDIARIES 
 
Adaptive Technologies Corp.                          Michigan, United States 
Hertel Cutting Technologies Inc.                     Tennessee, United States 
J&L America Inc.                                     Michigan, United States 
Kennametal Australia Pty. Ltd.                       Australia 
Kennametal China Limited                             China 
Kennametal Foreign Sales Corporation                 Barbados 
Kennametal GTS Co., Ltd.                             Thailand 
Kennametal GTS Pte. Ltd.                             Singapore 
Kennametal Hardpoint, Inc.                           Delaware, United States 
Kennametal Hertel AG                                 Germany 
Kennametal Ltd.                                      Canada 
Kennametal de Mexico, S.A. de C.V.                   Mexico 
 
 
CONSOLIDATED SUBSIDIARIES OF KENNAMETAL HERTEL AG 
 
Hertel Iberica S.A.                                  Spain 
Hertel Japan Limited                                 Japan 
Kennametal Hertel G.m.b.H.                           Germany 
Kennametal Hertel Belgium S.A.                       Belgium 
Kennametal Hertel France S.A.                        France 
Kennametal Hertel Nederland B.V.                     Netherlands 
Nederlandse Hardmetaal Fabrieken B.V.                Netherlands 


                                                                   EXHIBIT 23 
 
 
                  CONSENT OF INDEPENDENT PUBLIC ACCOUNTANTS 
 
 
As independent public accountants, we hereby consent to the incorporation of 
our reports, included or incorporated by reference in this Form 10-K, into the 
Company's previously filed registration statements on Form S-8, Registration 
No. 2-80182; Form S-8, Registration No. 33-25331; Form S-8, Registration 
No. 33-55768; Form S-8, Registration No. 33-55766; and Form S-3, Registration 
No. 33-61854, including the prospectuses therein, relating to the company's 
Stock Option Plan of 1982, Stock Option and Incentive Plan of 1988, Stock 
Option and Incentive Plan of 1992, Directors Stock Incentive Plan and the 
Dividend Reinvestment and Stock Purchase Plan (as amended).  It should be 
noted that we have not audited any financial statements of the Company 
subsequent to June 30, 1995 or performed any audit procedures subsequent to 
the date of our report. 
 
 
                                                       ARTHUR ANDERSEN LLP 
 
 
Pittsburgh, Pennsylvania 
September 19, 1995 


 

5 This schedule contains summary financial information extracted from the June 30, 1995 Consolidated Financial Statements and is qualified in its entirety by reference to such financial statements. 1,000 YEAR JUN-30-1995 JUL-1-1994 JUN-30-1995 10,827 0 187,511 12,106 200,680 409,274 517,180 256,838 781,609 225,202 0 36,712 0 0 355,173 781,609 983,873 983,873 560,867 560,867 20,909 1,477 12,793 113,294 45,000 68,294 0 0 0 68,294 2.58 2.58